Digital Remote Control permits the control of the main system without the use of a PC. Installed in an ergonomic position within the dashboard of the car, the user can: choose between two “tuning” configurations pre-sets created and saved using the bit software; select the source from the master, auxiliary and optical digital inputs; adjust main system functions (volume, balance, fader and subwoofer volume); identify the proper position of the sources output level set while tuning the bit processor as well as adjust the display brightness and to reduce glare during night driving.
It is a kit composed of a cable and an adapter allowing a 2 m / 78.74 in. additional extension of the cable supplied with the DRC. This extension is required for installations on especially long vehicles such as SUV’s. Total length of the supplied cable with the extension is equal to 6,5 m / 225.90 in.
PACKAGE: Polybag – Qty. 1
Les amplificateurs Thesis sont nés des connaissances et de l’expérience acquise avec le HV venti, améliorés par l’innovation des technologies numériques. Le résultat est une combinaison parfaite entre le meilleur de la technologie analogique et les fonctionnalités avancées des technologies numériques dans un seul et même produit. La précieuse synergie autour de la technologie Full DA HD amène l’expérience d’écoute automobile vers un nouveau niveau d’excellence ; la synthèse d’un savoir faire unique employé pour la reproduction audio embarquée.
TH uno est un amplificateur simple canal (mono) destiné à obtenir des performances maximales quelle que soit la charge ; capable de délivrer 2300 W sous 1 Ohm et 200 W dans l’audiophile Classe A. Spécialement conçu pour piloter des haut-parleurs et des subwoofers avec une grande maîtrise.

Load Imp. | Mono | |
Dual Power – Hi-Current | 4 Ohm | 850 W x 1 |
2 Ohm | 1500 W x 1 | |
1 Ohm | 2300 W x 1 | |
Dual Power – A Class | 4 Ohm | 200 W x 1 |
Amp Chain | 4 Ohm (2 Amp) | 3000 W x 1 |
2 Ohm (2 Amp) | 4500 W x 1 |

Pure digital signal transfer with a resolution up to 24 bit / 96 kHz

Innovation is at the heart of the state-of-the-art digital decoding section. The S/PDIF optical input allows direct connection to digital sources with the ability to re-launch the digital signal to other Thesis amplifiers through the AD Link (Audison DigitalLink) system. Each amplifier features 192 kHz/24 bit PCM D/A conversion through a very high quality converter.

Provides the selection of four possible presets: Energy Saving, Hi-Current, Hi-AB Class and full A Class operation.

Inherited from the HV venti and making the most of TH’s extreme versatility, the complete crossover circuit of the TH amplifier is removable; a high-end sound quality solution.

Four Synchro-PWM power supplies allow for a very fast transient current response and to create a Dual Mono configuration.
Digital Remote Control permits the control of the main system without the use of a PC. Installed in an ergonomic position within the dashboard of the car, the user can: choose between two “tuning” configurations pre-sets created and saved using the bit software; select the source from the master, auxiliary and optical digital inputs; adjust main system functions (volume, balance, fader and subwoofer volume); identify the proper position of the sources output level set while tuning the bit processor as well as adjust the display brightness and to reduce glare during night driving.
It is a kit composed of a cable and an adapter allowing a 2 m / 78.74 in. additional extension of the cable supplied with the DRC. This extension is required for installations on especially long vehicles such as SUV’s. Total length of the supplied cable with the extension is equal to 6,5 m / 225.90 in.
PACKAGE: Polybag – Qty. 1